Configuring A Color Compare Sensor - Banner iVu Plus TG Series Instruction Manual

In the Demo example, the Intensity Range is 0 – 255.
• Set the Color Space.
Two color space options are available:
RGBI—The average and standard deviation values for each of Red, Green, Blue, and Intensity within
◦
the ROI are calculated
HSI—The average and standard deviation values for each of Hue, Saturation, and Intensity within the
◦
ROI are calculated
In the Demo example, the Color Space is HSI.
6. Click Display Mode
7. To complete the Average Color application setup, adjust the trigger setting as appropriate for the application.
Note: Remote Teach does not work with the Average Color sensor.

13.8 Configuring a Color Compare Sensor

1. Begin the setup with a good part.
2. Center the part to be tested in the Field of VIew (FOV).
3. Adjust the Region of Interest (ROI) so that it surrounds the feature of interest. In the Demo example, the ROI covers
the Banner logo, even when the logo is rotated.
4. Click Teach. The sensor learns the color.
Figure 127. Intensity Range Screen
Figure 128. Color Space Screen
to access the Inspection Statistics and view the Average Color.
Figure 129. Color Space Screen
www.bannerengineering.com - Tel: + 1 888 373 6767
iVu Plus TG and Color Gen2 Image Sensors
91