Rslogix5000 Configuration - Banner iVu Plus TG Series Instruction Manual

iVu Plus TG and Color Gen2 Image Sensors
The connection looks like the one in

15.4.9 RSLogix5000 Configuration

To create an implicit Class 1 configuration to the iVu using EtherNet/IP when using a ControlLogix family PLC, configure the
iVu as a "Generic Ethernet Module" under the ENET_MODULE. The following is a sample setup of a Banner device:
1. Add a generic Ethernet module to the PLC's Ethernet card.
a. Click New Module.
b. Click Communications, then Generic Ethernet Module.
146
Figure 192
(p. 145).
Figure 193. Add Ethernet Module
www.bannerengineering.com - Tel: + 1 888 373 6767