Device Home Screen; Display Mode; Image With Annotations; Image Without Annotations - Banner iVu Plus TG Series Instruction Manual

7 Device Home Screen

Use the Home screen on the iVu display to monitor inspections and to configure the iVu. Typically, the part being inspected
is centered on the screen with the feature of interest bounded by the Region of Interest (ROI), a rectangle as shown below.
The ROI can be rotated and resized, and is highlighted when selected for adjustment.
In following figure, there are two ROI because it is a multi sensor inspection. The green annotations indicate the object
passes, and the red annotations indicate a failure. This sample inspection failed as shown by the red X next to the Display
mode button.
Display Modes
Main Menu

7.1 Display Mode

Main Menu > Home > Display Mode (icon)
Use the display mode button on the upper left corner of the display to cycle through all three display modes. The three
display modes include: Image with Annotations, Image without Annotations, and Inspection Statistics.

7.1.1 Image with Annotations

Click Display Mode to show the image with the annotations on. The green or red areas indicate sensors that pass or
fail in the ROI.

7.1.2 Image without Annotations

Click Display Mode to see the image without the annotations from the sensors.
Inspection Name/Sensor Name Button
Field of View (FOV)
Figure 32. Home Screen
Figure 33. Home Screen with Annotations
www.bannerengineering.com - Tel: + 1 888 373 6767
iVu Plus TG and Color Gen2 Image Sensors
Region of Interest (ROI)
Help Button
Zoom In
Zoom Out
Manual Trigger
31