Sensor Types; Multiple Sensors; Multiple Inspections; Imager Resolution - Banner iVu Plus TG Series Instruction Manual

Figure 2. Select Type Screen
Note: Switch between Live Mode and Demo Mode any time by going to Main Menu > System > Mode.

2.4 Sensor Types

The iVu includes the following types:
Sensor Type Description
Area Sensor Use an Area sensor to ensure that a feature, or multiple features, are present on a part. See
(p. 38).
Blemish Sensor Use a Blemish sensor to find flaws on a part, or to make sure that a feature exists on a part. See
Blemish Menu
Match Sensor Use a Match sensor to verify that a pattern, shape, or part in any orientation matches a reference
pattern. See
Sort Sensor Use a Sort sensor to recognize and sort up to ten different patterns within the same inspection. See
Sort Menu
Average Color Use an Average Color sensor to calculate the average color (RGB or HSI) within the area of interest on
a part (color models only). See
Color Compare Use a Color Compare sensor to verify whether a part's color matches a reference color (color models
only). See
Color Area Use a Color Area sensor to ensure that a feature, or multiple features, are the correct color and are
present on a part (color models only). See

2.5 Multiple Sensors

Firmware versions 1.2.0 and newer include multiple sensor functionality. Use multiple sensors to inspect more than one
feature on each part being inspected. Create and store up to 30 such inspections on the iVu.

2.6 Multiple Inspections

The iVu supports multiple inspections that facilitate storing and controlling up to 30 inspections of different sensor types.

2.7 Imager Resolution

iVu models have a 752 x 480 resolution. Resolution can be adjusted on iVu grayscale models.
(p. 39).
Match Menu
(p. 41).
(p. 42).
Average Color Menu
Color Compare Menu
(p. 46).
www.bannerengineering.com - Tel: + 1 888 373 6767
iVu Plus TG and Color Gen2 Image Sensors
Figure 3. System Menu
(p. 43).
Color Area Menu
(p. 47).
Area Menu
9