Add A New Inspection - Banner iVu Plus TG Series Instruction Manual

iVu Plus TG and Color Gen2 Image Sensors
Note: The retainer ring (C) and filter (D) are optional. Filter kits are available separately.

6.2 Add a New Inspection

Note: The iVu supports multiple inspections that facilitate storing and controlling up to 30 inspections of
different sensor types.
To add a new stored inspection:
1. Go to Main Menu > Inspection > Stored Inspections and click Add New.
2. Select the Sensor Type for the new inspection, and click Next.
Sensor Type
Area Sensor
Blemish Sensor
Match Sensor
Sort Sensor
Average Color
Color Compare
Color Area
28
C
E
D
C
A
Figure 26. C-Mount Lens Model Components
Figure 27. Add New Screen (TG models shown)
Description
Use an Area sensor to ensure that a feature, or multiple features, are present on a part. See
Area Menu
(p. 38).
Use a Blemish sensor to find flaws on a part, or to make sure that a feature exists on a part. See
Blemish Menu
(p. 39).
Use a Match sensor to verify that a pattern, shape, or part in any orientation matches a
reference pattern. See Match Menu
Use a Sort sensor to recognize and sort up to ten different patterns within the same inspection.
Sort Menu
See (p. 42).
Use an Average Color sensor to calculate the average color (RGB or HSI) within the area of
interest on a part (color models only) . See
Use a Color Compare sensor to verify whether a part's color matches a reference color (color
Color Compare Menu
models only) . See
Use a Color Area sensor to ensure that a feature, or multiple features, are the correct color and
are present on a part (color models only). See
www.bannerengineering.com - Tel: + 1 888 373 6767
A C-Mount Lens
B Lens Enclosure
B
C Retainer Ring
D Filter
E Filter Retainer Ring Tool
(p. 41).
Average Color Menu
(p. 46).
Color Area Menu
(p. 43).
(p. 47).