Device Main Menu - Banner iVu Plus TG Series Instruction Manual

iVu Plus TG and Color Gen2 Image Sensors

8 Device Main Menu

The Main Menu has four sections:
• Inspection—Modify inspection settings
• Imager—Run the Auto Exposure routine and adjust functions such as exposure, gain, and strobe
• Logs—Configure and view System and Inspection Logs
• System—Select the mode and manage the device
Inspection
Area
Sensors
Blemish
Match
Sort
Average Color
Available for
HSI Color Space
Available for
RGBI Color Space
Available for
HSI Color Space
Available for
RGBI Color Space
34
ROI and Mask
Intensity Range
Area Range
Pass Count
Pass Total Area
ROI and Mask
Sensitivity
Edge Length Range
Pass Count
Teach ROI Type
Percent Match
Rotation Range
Pass Count
Edit Pattern
Advanced
Timeout
Saved Patterns
Percent Match
Rotation Range
Pass Criteria
Timeout
1 ROI and Mask
Intensity Range
Color Space
Pass Hue
Pass Saturation
Pass Red
Pass Green
Pass Blue
Pass Intensity
Pass Hue Std Dev
Pass Saturation Std
Pass Red Std Dev
Pass Green Std Dev
Pass Blue Std Dev
Pass Intensity Std Dev
continued
Figure 38. Menu Map - Part 1
www.bannerengineering.com - Tel: + 1 888 373 6767
ROI and Mask
Color Compare 1
Color Tolerance
Intensity Tolerance
ROI and Mask
Color Area
1
Color Select
1 Color models only
Area Range
Pass Count
Pass Total Area
Tolerance
Number of Edges
Motion 2
Sensitivity
Rotation Range
Motion Teach ROI Type
3
Percent Match
Rotation Range
Edit Pattern
Advanced
Timeout
Inspection Name
Properties
Inspection ID
Motion
4
Select
Stored Inspections
Add New
Startup
Delete
Set Name / ID
2 Visible when Motion = Edge
Visible when Motion = Match
3
Not available in Sort
4