Home Screen; Sensor Neighborhood - Banner iVu Plus TG Series Instruction Manual

5.2

Home Screen

The Home screen provides access to connect to a sensor or emulator, update firmware, and view sensor and Vision
Manager software information.
The following are available from the Home screen:
•

Sensor Neighborhood

• Sensor Maintenance
• Emulators
• About
Only one sensor can be connected to each instance of the software. Open more than one instance of Vision Manager if you
want to connect to more than one sensor at a time. Only one instance of the software can be connected to the Emulator at
a time.
5.2.1 Sensor Neighborhood
Use Sensor Neighborhood on the
when the software is launched.
Active Sensors Tab
Use the Active Sensors tab in Sensor Neighborhood to connect to an active sensor. Available options vary depending on
the type of sensor to which Vision Manager is connected.
Navigate: Home > Sensor Neighborhood > Active Sensors.
This tab includes sensor information such as sensor status, sensor name, IP address, MAC address, and model number.
Sensors can also be added to Favorites.
Figure 14. Home Screen
Home screen to connect to active sensors. Sensor Neighborhood opens by default
www.bannerengineering.com - Tel: + 1 888 373 6767
iVu Plus TG and Color Gen2 Image Sensors
21