Configuration Instructions - Banner iVu Plus TG Series Instruction Manual

Table 85: Text Response 128-byte Submodule (Ident 0x00053)
PLC Input Data Name
Flag indicating when to Command ACK
Numeric Command Status
16-bit integer command response
32-bit integer command response
Floating-point command argument
Length-of-Command/Response string
128-character command response string
Flag Indicating When to Command ACK
Bit Position for Cyclic Input
Data
Bit 0
Bit 15

15.7.3 Configuration Instructions

Using Siemens TIA Portal (v13) Software
Installing the Banner iVu GSD File
Use these instructions to install the Banner iVu GSD file in the Siemens TIA Portal (v13) software. Use these instructions as
a basis for installing the Banner iVu GSD file in another controller (PLC).
1. Download the Banner iVu GSD file from
2. Start the Siemens TIA Portal (v13) software.
3. Click Open existing project.
4. Select a project and open it.
5. Click Devices & networks after the project has been uploaded.
Input Data Type
Unsigned16
Unsigned16
Unsigned16
Unsigned32
Float32
Unsigned32
128-byte
OctetString
Function
Command Channel Command
Acceptance Acknowledgement
Command Execution Error
www.bannerengineering.com
www.bannerengineering.com - Tel: + 1 888 373 6767
iVu Plus TG and Color Gen2 Image Sensors
PLC Output Data Name
Not applicable
.
Output Data Type
Not applicable
183