Sensor Maintenance - Banner iVu Plus TG Series Instruction Manual

iVu Plus TG and Color Gen2 Image Sensors
To remove a group and all the sensors within the group, click the across from the group name.
Network Adapters Tab
Use the Network Adapters tab on Sensor Neighborhood to view the network adapters that the system searches to find
sensors.
Navigate: Home > Sensor Neighborhood > Network Adapters.
Figure 17. Network Adapters Tab
Network adapter information including Link Status (connected/not connected), Adapter name, IP Address, and Subnet
Mask is also available.

5.2.2 Sensor Maintenance

Use Sensor Maintenance on the Home screen to view or change device properties.
Figure 18. Sensor Maintenance Tab
Sensor Maintenance includes sensor information such as sensor Status, Sensor Name, IP address, MAC address, Model
number, Firmware Version, and which sensors are tagged as favorites.
Actions include update firmware and view or change some sensor settings . Backup or restore sensor data is not
available through Vision Manager. See Save to USB (p. 59).
Update the iVu Firmware
Note: A firmware update requires a cable and a USB flash drive. See (p. 235).
www.bannerengineering.com - Tel: + 1 888 373 6767 23