Multiple Sensors In An Inspection; Command Channel Command Status Register; Command Channel Error Codes - Banner iVu Plus TG Series Instruction Manual

COLOR_AREA_HISTORY Command Group
Command Group
Get COLOR_AREA_HIS
TORY
Get COLOR_AREA_HIS
TORY
Get COLOR_AREA_HIS
TORY
Get COLOR_AREA_HIS
TORY
Examples
>> get color_area_history <ColorArea2> mincount\x0D\x0A
<< OK\x0D\x0A
<< 14\x0D\x0A
>> get color_area_history <ColorArea2> minarea\x0D\x0A
<< OK\x0D\x0A
<< 10\x0D\x0A

14.4.5 Multiple Sensors in an Inspection

If there is more than one sensor in the inspection, all SensorType_Result and SensorType_History related commands must
Sensor Name in "< >" brackets.
include the
Examples
>> get area_result <Area1> count\x0D\x0A
<< OK\x0D\x0A
<< 7665\x0D\x0A
Notice that <Area1> is the sensor name of an Area sensor in the current inspection.
>> get blemish_history <Blemish1> minedgelength\x0D\x0A
<< OK\x0D\x0A
<< 22\x0D\x0A
Notice that <Blemish1> is the sensor name of a Blemish sensor in the current inspection.

14.4.6 Command Channel Command Status Register

The command status register will confirm receipt of a command by reflecting the exact command ID received, regardless of
whether the command was valid or not.

14.4.7 Command Channel Error Codes

Table 20: iVu Command Channel Error Codes
Numeric ID Text ID
00000 SUCCESS
10000 EMPTY_FRAME_RECEIVED
10001 COMMAND_NOT_RECOGNIZED
10100 GROUP_MISSING
10101 GROUP_NOT_FOUND
Item Description
MinCount The minimum number of detected areas of a specific color since the
history was last cleared.
MaxCount The maximum number of detected areas of a specific color since the
history was last cleared.
MinArea The minimum detected area value of a specific color since the history
was last cleared.
MaxArea The maximum detected area value of a specific color since the history
was last cleared.
www.bannerengineering.com - Tel: + 1 888 373 6767
iVu Plus TG and Color Gen2 Image Sensors
Description
Command processed successfully
Indicates that the request was empty. The command channel
requires a command, any arguments, and an end-of-frame
delimiter.
The command specified is not recognized
A Group ID must be specified immediately after the command
The specified Group ID is invalid / unknown
123