Trigger Modes; Change The Running Inspection - Banner iVu Plus TG Series Instruction Manual

3. Click the yellow arrow to enter a custom inspection name, if desired.
4. Click Done. The newly created inspection will now be the currently running inspection.

6.3 Trigger Modes

The iVu has five trigger modes that determine how the device captures and processes images:
• External
• Internal
• Free Run
• Industrial Ethernet Only
• Command
Select one of the trigger modes by accessing Main Menu > Imager > Trigger on the display.
these trigger modes in more detail.

6.4 Change the Running Inspection

To change the currently running inspection:
1. From the Home screen, click [Inspection name] in the top center of the screen to display all of the stored
inspections.
Figure 28. New Inspection Screen
Figure 29. Trigger Screen
Figure 30. Home Screen
www.bannerengineering.com - Tel: + 1 888 373 6767
iVu Plus TG and Color Gen2 Image Sensors
Trigger (p. 54) describes
29