Startup; Delete Inspections; Set Name/Id - Banner iVu Plus TG Series Instruction Manual

iVu Plus TG and Color Gen2 Image Sensors

9.4.3 Startup

Main Menu > Inspection > Stored Inspections > Startup
Click Startup to select the inspection to use as the startup inspection. The selected inspection automatically starts after the
iVu powers up.

9.4.4 Delete Inspections

Main Menu > Inspection > Stored Inspections > Delete
Click Delete to delete stored inspections. Note that any running inspection, or the inspection marked as the Startup
inspection, cannot be deleted.

9.4.5 Set Name/ID

Main Menu > Inspection > Stored Inspections > Set Name/ID
Use Set Name/ID to change the name or ID of an inspection. Sort the inspections in numeric or alphabetical order by
clicking on the icon beside the Help icon. Click Name to edit the name of the inspection. Click ID to change the ID of the
inspection.
52
Figure 53. Add New Screen
Figure 54. New Inspection Screen
www.bannerengineering.com - Tel: + 1 888 373 6767