White Balance - Banner iVu Plus TG Series Instruction Manual

iVu Plus TG and Color Gen2 Image Sensors
Figure 64. Resolution Screen
Coarse resolution has a maximum FOV of 376×240 pixels, and Fine resolution has a maximum FOV of 752×480 pixels. Fine
resolution has four times more pixels than Coarse resolution. Inspection performance may be affected when using Fine
resolution, depending on the application. By default, the FOV is set to the default FOV size (320×240) in Coarse resolution
mode.
When a new resolution is selected, Match and Sort patterns must be taught again. A trigger is required before any on-
screen data is updated.
Any sensor within the inspection will use the selected resolution. Only one resolution is used per inspection.

10.9 White Balance

Use White Balance to adjust the intensities of the colors in the image so that the colors most closely match the actual
objects. The White Balance setting is stored with each inspection. White Balance is an automatic process that is only
available on color models.
Figure 65. White Balance Screen
www.bannerengineering.com - Tel: + 1 888 373 6767 57