Fail Hold Time; Lcd Timeout; Touch Calibration; Advanced - Banner iVu Plus TG Series Instruction Manual

iVu Plus TG and Color Gen2 Image Sensors

11.7.1 Fail Hold Time

Main Menu > System > Display Settings > Fail Hold Time
The Fail Hold Time determines how long a failed image is shown on the display so that you can see what failed. The iVu
continues to process any triggers and the inspection continues normally. This time delay is only for the touchscreen display.
Set this parameter from 0 seconds to 3600 seconds using the slider.

11.7.2 LCD Timeout

Main Menu > System > Display Settings > LCD Timeout
When the device is not being used, the display dims after a user-selectable period of time. Use the arrow keys or the slider
to set the display time out.
Note: This screen is not available in the Emulator.

11.7.3 Touch Calibration

Main Menu > System > Display Settings > Touch Calibration
Touchscreen calibration may be necessary if the software does not correctly respond when an icon on the screen is
pressed. The calibration routine aligns the touchscreen's coordinates to the display behind it. Follow the prompts on the
screen when executing the touchscreen calibration function.
Note: This screen is not available in the Emulator.

11.7.4 Advanced

Main Menu > System > Display Settings > Advanced
The Advanced Display screen allows you to enable advanced display features.
Optimize Display Response
This feature helps make the display more responsive when the iVu is busy (either inspection times are long and/or
no idle time exists between inspections). Disable this feature if missed triggers occur due to touchscreen presses.
With this setting disabled, the display may become sluggish when the iVu is busy.
Invert Display
This feature rotates the display 180 degrees for applications where the device is mounted upside down.

11.8 Reboot Sensor

Main Menu > System > Reboot Sensor
The Reboot Sensor screen allows you to force a reboot of the device.
Note: This option is not available on the Emulator.
72
Figure 88. Fail Hold Time Screen
www.bannerengineering.com - Tel: + 1 888 373 6767