Remove The Defective Dual Nic From The S8510 Server - Avaya S8510 Manual

Job Aid: Replacing the Avaya S8510 dual network interface
3. Lift the cover back then straight up and set it aside (Note 3 in
cover of the S8510 server

Remove the defective dual NIC from the S8510 server

To remove the defective dual NIC from the S8510 server:
1. Press the release latches on the PCI expansion card riser (Note 1 in
Figure 13: Removing and replacing the dual NIC in the S8510 server
hw85nicr LAO 040308
Figure notes:
1. Press the release latch on the
PCI expansion card riser.
2. Grasp the dual NIC by its edges and carefully pull it straight out of the PCI expansion card
riser slot (Note 2 in
50 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
on page 49).
Figure 13).
Figure 12: Removing the
2
2. Pull the dual NIC card straight out of
the slot.
Figure 13).
1 1