Replace The Power Supply - Avaya S8510 Manual

3. With your thumb press the release tab on the power supply in bay 2 (see Note 1 in
Figure 19).
Figure 19: Removing the redundant power supply in the S8510 Server
hw851p2r LAO 021308
Figure notes:
While grasping the handle press
1.
the thumb release tab.
4. Grasp the handle (Note 2 in
5. Pull the power supply out of the bay.
6. Set the defective power supply aside; you will return it to Avaya later.

Replace the power supply

To replace the power supply:
!
WARNING:
To reduce the risk of electric shock or damage to the equipment, do not connect
WARNING:
the power cord to the power supply until you install the power supply.
1. Slide the power supply into the power supply bay (see Note 3 in
2. Ensure that the tab is locked into place (see Note 1 in
securely seated in the bay.
Replacing a power supply in the S8510 with dual power supplies
2
Pull the power supply out of the bay.
2.
Figure 19).
1
Figure 19).
Figure 19) and the power supply is
03-602953 Issue 1 June 2008 63