Update The Samp Firmware; Ensure Samp Administration - Avaya S8510 Manual

5. Reconnect the LAN connection (if used) from the Ethernet port on the SAMP at the back of
the server.
6. Reconnect the power cord(s) to the power supply(ies) at the back of the server.
7. Push the server completely into the rack and secure into place with the two captive screws
on both sides of the server.

Update the SAMP firmware

After replacing the SAMP card and after the server is up, you might need to update the firmware
on the SAMP, which ships from the factory with Avaya defaults.
1. Check the Avaya support Website (http://support.avaya.com) for the most recent firmware
for this SAMP card.
2. Download the new firmware to your laptop.
3. From the Maintenance Web Pages, select Miscellaneous > Download Files and press
Enter.
The Download Files page displays.
4. Select the "File(s) to download from the machine I'm using to connect to the server" button.
5. Use the Browse button to navigate to the firmware file on your laptop.
6. Press the Download button.
Wait for the download to complete.
7. Connect your laptop to the server and SSH to the server's command line interface.
8. Type sampupdate at the command line interface and press Enter.
Note:
Detailed information about configuring the SAMP card is in the Avaya Server
Note:
Availability Management Processor User Guide (03-300322).

Ensure SAMP administration

To ensure that Communication Manager pushed the SAMP administration to the card:
1. Establish an SSH connection to the server command line.
2. Type sampdiag -v and press Enter.
3. Ensure that the output looks like the following (See Note).
Replacing the SAMP on the Avaya S8510 server
03-602953 Issue 1 June 2008 75