Check For A Super-User Login - Avaya S8510 Manual

Job Aid: Replacing the Avaya S8510 server
9. Select the backup file that you want to monitor and click Check Status.
The Restore History Results page displays.
10. Click Refresh periodically until the message indicates that the restore was successful. This
takes approximately five (5) minutes.
11. Repeat Steps 1-10 above to restore:
a. Security data set (if not performed in Step 6 above).
b. Communication Manager translations (main server/primary controller only, not a LSP)
data

Check for a super-user login

Note:
If you restored Communication Manager translations (xln file) earlier, omit this
Note:
section and continue with
authentication files
When you are replacing a server or hard drive, the Communication Manager Maintenance Web
Pages might time out if too much time elapses without activity. In this case, you might not be
able to log in again with the craft login. This problem can occur after you install the new server
and restore translation and security files, but before you install the new authentication file.
Restoring translation and security files does not restore the init and inads service accounts, nor
is "sroot" available until the authentication file is installed. However, you can log in with the
customer's super-user login, if it exists.
To ensure that a super-user login exists in Communication Manager:
1. SSH to and log in as craft to the server command line interface.
2. At the Linux command line interface type cat /etc/passwd |grep 555 and press
Enter.
A list of super-user logins displays (example only):
init:x:778:555::/var/home/defty:/bin/bash
inads:x:779:555::/var/home/defty:/bin/bash
craft:x:780:555::/var/home/defty:/bin/bash
dadmin:x:1101:555::/var/home/defty:/bin/bash
erik:s:1002:555::/var/home/defty:/bin/bash
Look for any logins other than the init, inads, and craft logins. If no additional super-user
logins exist, you must create one
26 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
Install the Communication Manager license and
on page 28.
(Create a super-user login on page 27).