Job Aid: Replacing the power supply on the Avaya S8510 Server
Figure 16: Removing the main power supply in the S8510 Server
hw851p1r LAO 021308
Figure notes:
1.
While grasping the handle press the
thumb release tab.
3. Pull the power supply out of the bay.
4. Set the defective power supply aside; you will return it to Avaya later.
Install the replacement power supply
To install the replacement the power supply:
!
WARNING:
To reduce the risk of electric shock or damage to the equipment, do not connect
WARNING:
the power cord to the power supply until you install the power supply.
1. Slide the replacement power supply into the power supply bay (see Note 3 in
2. Ensure that the tab is locked into place (see Note 1 in
securely seated in the bay.
60 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
2
2.
Pull the power supply out of the bay.
Figure
16) and the power supply is
1
Figure
16).