Remove The Cover Of The S8510 Server - Avaya S8510 Manual

4. Release the rail lock by pushing the level in as you slide the server out of the rack (Note 3 in
Figure 11: Remove the S8510 server from the rack

Remove the cover of the S8510 server

!
CAUTION:
Ensure that the power is completely removed from the server: power cords must
CAUTION:
be detached from the power supply(ies) and the SAMP.
To remove the cover from the S8510 server to access internal components:
1. Use a #2 Phillips (cross-point) screwdriver to rotate the latch release lock counter-clockwise
to the unlocked position (Note 1 in
Figure 12: Removing the cover of the S8510 server
Figure notes:
1. Turn the latch release lock
counter-clockwise to the unlocked
position.
2. Lift the latch up to unlock.
2. Lift the latch up to unlock (Note 2 in
2
1
Remove the cover of the S8510 server
on page 48).
Figure 12).
3
3. Slide the cover back then lift straight
up to remove.
Figure 12).
hw8510cr LAO 021008
03-602953 Issue 1 June 2008 49