Install The Replacement S8510 Server In The Rack - Avaya S8510 Manual

Job Aid: Replacing the SAMP on the Avaya S8510 Server
Figure 24: Replacing the cover on the S8510 server
Figure notes:
1. Latch release lock
2. Push the latch down to lock.
2. Slide the cover forward.
3. Push the latch down to lock (Note 2 in
4. Rotate the latch release lock clockwise to secure the cover (Note 1 in

Install the replacement S8510 server in the rack

To install the replacement S8510 server back in its rack:
1. Install the server onto the slide rails in the rack (see
from the rack
2. Reconnect the Ethernet cable to the dual NIC at the back of the server.
3. Reconnect the power cord to the SAMP at the back of the server.
4. Reconnect the USB modem cable to the USB port on the SAMP at the back of the server.
74 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
2
1
on page 69.
3
3. Slide the cover back then lift straight
up to remove.
4. Align the cover with the J hooks on
each side of the server.
Figure 24).
Figure 21: Remove the S8510 server
hw8510cr LAO 021008
Figure 24).