Replace The Server Cover - Avaya S8510 Manual

Replace the server cover

To replace the cover on the S8510 server use
!
WARNING:
Ensure that the SAMP cable and any other internal cables are clear of the cover
WARNING:
before replacing it on the server.
1. Place the cover on top of the server, aligning it with the J hooks on the sides.
Figure 6: Replacing the cover on the S8510 server
Figure notes:
1. Latch release lock
2. Push the latch down to lock.
2. Slide the cover forward.
3. Push the latch down to lock (Note 2 in
4. Rotate the latch release lock clockwise to secure the cover (Note 1 in
5. Place the customer's Communication Manager CD in the optical drive tray (Note 8 in
Figure 1) of the replacement server.
2
1
Figure 6 in reverse order.
3
3. Slide the cover back then lift straight
up to remove.
4. Align the cover with the J hooks on
each side of the server.
Figure 6).
03-602953 Issue 1 June 2008
Replacing the S8510 server
hw8510cr LAO 021008
Figure 6).
19