Remove The Cover Of The S8510 Server - Avaya S8510 Manual

Job Aid: Replacing the SAMP on the Avaya S8510 Server

Remove the cover of the S8510 server

!
CAUTION:
Ensure that the power is completely removed from the server: power cords must
CAUTION:
be detached from the power supply(ies) and the SAMP.
To remove the cover from the S8510 server to access internal components:
1. Use a #2 Phillips (cross-point) screwdriver to rotate the latch release lock counter-clockwise
to the unlocked position (Note 1 in
Figure 22: Removing the cover of the S8510 server
Figure notes:
1. Turn the latch release lock
counter-clockwise to the unlocked
position.
2. Lift the latch up to unlock.
2. Lift the latch up to unlock (Note 2 in
3. Lift the cover back then straight up and set it aside (Note 3 in
70 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
2
1
Figure 22).
3
3. Slide the cover back then lift straight
up to remove.
Figure 22).
hw8510cr LAO 021008
Figure 22).