Replacing The Power Supply In The S8510 With Only One Power Supply; Power Down The S8510 - Avaya S8510 Manual

Job Aid: Replacing the power supply on the Avaya S8510 Server
Replacing the power supply in the S8510 with only one
power supply
!
CAUTION:
If the S8510 Server has only one power supply, you must power down the server
CAUTION:
and remove the power cord before replacing the power supply.

Power down the S8510

To backup and power down the affected server from the Maintenance Web Pages using either
procedure:
Power down the server through the Web interface
•
Power down the server manually
•
Power down the server through the Web interface
At the Web interface main menu for server:
1. Select Shutdown Server with these options:
Check (select) Immediate Shutdown
•
Uncheck (deselect) Restart server after shutdown
•
2. Click Shutdown and wait until the server has powered down.
The LEDs on the server flash and then go out, indicating that the server has shut down.
Although the middle network LED (number 1) might not go out, the server has shut down
and is ready for the hard drive replacement.
Power down the server manually
If you cannot access the server's Maintenance Web Interface, you can shut down the server
manually:
1. Press Power On/Standby on the front of the server.
2. Wait for the server to power down.
58 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server