Check Led Activity On The Dual Network Interface Card - Avaya S8510 Manual

4. Reconnect the USB modem cable to the USB port on the SAMP at the back of the server.
5. Reconnect the LAN connection (if used) from the Ethernet port on the SAMP at the back of
the server.
6. Reconnect the power cord(s) to the power supply(ies) at the back of the server.
7. Push the server completely into the rack and secure it into place using the captive screws
on both sides of the server.

Check LED activity on the dual network interface card

When the S8510 server is back in service:
1. Check the LEDs on each port of the dual NIC for network activity (Note 1 in
Figure 15: S8510 dual-NIC LEDs
Figure notes:
1. Network connection and speed LED
2. If the network connection and speed LED is
Off: there is a 10 BASE-T active link.
•
Green: there is a 100 BASE-T active link.
•
Orange: there is a 1000 BASE-T active link.
•
Check LED activity on the dual network interface card
1
Gb 1 Gb 2
2. Network activity LED
03-602953 Issue 1 June 2008
Figure 15).
2
hw85sncl LAO 061008
53