Replace The Samp Power Supply On The S8510; Return The Defective Equipment - Avaya S8510 Manual

Job Aid: Replacing the SAMP power supply
Note:
Do not re-use any part of the power supply.
Note:

Replace the SAMP power supply on the S8510

To replace the SAMP power supply:
1. Connect the RJ11 end of the new power supply to the SAMP power connector on the rear
panel of the S8510 server.
2. Connect the grounded, 110 VAC plug to the new transformer.
3. Connect the plug to the power source.

Return the defective equipment

To return the defective SAMP power supply:
1. Place the defective equipment in the protective packaging that accompanied the
replacement equipment.
2. Return the defective equipment to Avaya using the procedures established for your region.
78 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server