Volvo C30 2007 Service And Repair Manual page 865

2012 Volvo C30 T-5
ACCESSORIES AND BODY, CAB Other Electrical Equipment - Removal, replacement and installation
Fig. 8: Back-Up Lamp Switch Leads
Courtesy of VOLVO CARS CORPORATION
Install the cables in the connector with the opening for the primary lock facing up as shown in the illustration.
Press in the secondary lock.
JOINING CABLES
Splice the new connector with cables to the existing wiring. See JOINING CABLES .
INSTALLING THE CONNECTOR
Fig. 9: Identifying Tie-Strap Installed
Courtesy of VOLVO CARS CORPORATION
Install the connector with the wiring on the back-up lamp switch. Install a tie-strap as shown in the illustration
so that the cable harness is not in contact with the gear selector cable.