2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation
Fig. 121: Identifying Temperature Sensor For Evaporator
Courtesy of VOLVO CARS CORPORATION
Fold down the carpet in the driver's side footwell towards the heater unit.
Turn the temperature sensor together with the cable harness a 1/4 turn clockwise.
Pull the temperature sensor straight out. Remove the temperature sensor.
Remove the connector.
INSTALLATION
INSTALLING THE TEMPERATURE SENSOR FOR THE EVAPORATOR
Connect the connector.
Align the hooks for the temperature sensor in the opening so that the connector is turned down.
Place the temperature sensor down against the surface of the heater unit. Turn the temperature sensor a 1/4 turn
counter-clockwise.
FINISHING