Volvo C30 2007 Service And Repair Manual page 144

ACCESSORIES AND EQUIPMENT Bumpers And Mudflaps - Installation Instructions, Accessories
Fig. 47: Identifying Tool P/N 9512782
Courtesy of VOLVO CARS CORPORATION
Rivet the nuts in the drilled holes. Use tool part no. 9512782 .

Fig. 48: View Of New Protective Plate Screws
Courtesy of VOLVO CARS CORPORATION
Install the new protective plate for marking and drilling holes for the left front mounting.

At final attachment stage of the protective plate, the two screws must have two spacer washers each

between the mounting lugs and the subframe. This is not required at this stage.
2012 Volvo C30 T-5