Volvo C30 2007 Service And Repair Manual page 81

3M 08115 is not approved as a substitute for Volvo bodywork adhesive.
If 3M 08115 is not available, then sealing compound with the following properties should be used:
-flows out without running

-has the correct hardness

-can be sanded when hardened

-has the correct flexibility.

Fig. 4: Soundproofing, 68117640
Courtesy of VOLVO CARS CORPORATION
4. Foam rubber replacement soft (soundproofing foam)
Soundproofing foam is installed in hollow spaces to counteract propagation of sound in the body. There are 2
types of approved soundproofing foam:
Volvo's soundproofing foam consists of a wax-treated cylinder 50x50 mm. It can be compressed for
installation between metal parts. Several cylinders can be used if one is not enough.
Use: Soundproofing, 68117640
3M ' 2-component foam starts to foam when the components are mixed. The foam is suitable for filling of
larger hollow spaces and can be applied between the roof bow and the roof panel. Follow the supplier's
instructions for application.
Use: 2-component foam, 3M 08463
RUSTPROOFING
2012 Volvo C30 T-5
ACCESSORIES AND BODY, CAB Body Frame - General Information
Special tool