Install:
the housing around the fan motor
the cover for the fan motor using 4 screws. Tighten
the cover and the pipe couplings. See: COOLANT PIPE FUEL-POWERED PREHEATER
(B5244S4) or COOLANT PIPE FUEL-POWERED PREHEATER (B5254T3, B5254T7)
the control module. See: FUEL FIRED BOOSTER HEATER CONTROL UNIT (B5244S4) or FUEL
FIRED BOOSTER HEATER CONTROL UNIT (B5254T3, B5254T7)
the auxiliary heater acc. to: see FUEL FIRED BOOSTER HEATER (B5244S4) or FUEL FIRED
BOOSTER HEATER (B5254T3, B5254T7).
FINISHING
TESTING THE ENGINE COOLANT HEATER
Carry out a performance test of the engine coolant heater. See: FUEL-POWERED PREHEATER,
CHECKING .
FUEL FIRED BOOSTER HEATER WATER-IN-FUEL SENSOR (B5254T3, B5254T7)
NOTE:
The illustrations in this service information are used for different model years
and/or models. Some variation may occur. However, the essential information in
the illustrations is always correct.
PREPARATORY WORK
REMOVING COMPONENTS
2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation