Volvo C30 2007 Service And Repair Manual page 493

Fig. 115: Identifying Rear Connector
Courtesy of VOLVO CARS CORPORATION
Unscrew the cover from the service valve.
Remove:
the service valve using an extended 24 mm sleeve

the screw (2) at the condenser connection.

INSTALLING THE PIPE / HOSE BETWEEN THE CONDENSER AND THE EXPANSION VALVE
NOTE: For tightening torques, see: TIGHTENING TORQUE .
Install the cap nut for the expansion valve.
Install:
the M8 screw on the condenser connection

the service valve. Tighten. See: TIGHTENING TORQUE

the service valve cover.

2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation