Calibrate Position Sensor Using Vida (Volvo Scan Tool) - Volvo C30 2007 Service And Repair Manual

2012 Volvo C30 T-5
ACCESSORIES AND BODY, CAB Other Electrical Equipment - Removal, replacement and installation
INSTALLATION
To install, reverse the removal procedure.

Calibrate position sensor using VIDA (Volvo scan tool).

POSITION SENSOR REAR, HEADLAMP (2010 - 2011 EARLY)
REMOVAL
NOTE: Removal steps in this procedure may contain installation details.
Fig. 47: Identifying Ignition In OFF Position
Courtesy of VOLVO CARS CORPORATION
Follow instructions for lifting points body frame, see JACKING POINTS BODY .
Fig. 48: Identifying Position Sensor Rear, Headlamp Screws
Courtesy of VOLVO CARS CORPORATION