Volvo C30 2007 Service And Repair Manual page 142

ACCESSORIES AND EQUIPMENT Bumpers And Mudflaps - Installation Instructions, Accessories
Remove the screws for the engine splash guard and remove it.

The two screws (1) will be reused, place the others to one side.

Fig. 44: View Of Subframe Clips
Courtesy of VOLVO CARS CORPORATION
Remove the five clips in the subframe and bracket for the radiator. They will not be reused.

APPLIES TO ALL CARS WITH 5 CYL. ENGINES
Fig. 45: Identifying Wood Positioned Inside Radiator Bracket
Courtesy of VOLVO CARS CORPORATION
Position three thin pieces of wood, plastic or metal on the inside of the radiator bracket. One opposite the

hole in the centre and one above the hole to the right. Place the third piece to the left of the left-hand hole.
This is to protect components in the connection to the radiator bracket when drilling holes.
2012 Volvo C30 T-5