ACCESSORIES AND EQUIPMENT Bumpers And Mudflaps - Installation Instructions, Accessories
Fig. 46: View Of Covered Engine Bay
Courtesy of VOLVO CARS CORPORATION
Cover the underneath of the engine with cardboard or similar, so that drilling shavings does not blow up
into the engine compartment.
NOTE:
Do not drill out the front hole to the left. A new hole will be drilled to the
side of it later.
Carefully drill out the four holes where the clips were located. Use tool P/N 9814112 .
File down the edges of the holes.
Remove any shavings.
NOTE:
Rustproof the hole edges thoroughly.
Remove the cover from under the engine.
2012 Volvo C30 T-5