Volvo C30 2007 Service And Repair Manual page 33

ACCESSORIES AND BODY, CAB Body Frame - Removal, replacement and installation
Install:
the bumper rail using the 6 M6 screws. Wait before installing the 2 screws for the servo unit

the radiator using the 4 M8 screws

the servo unit using the 4 M8 screws

the cable harness and washer hose on the bumper rail

the horn using the 2 M6 screws

the washer reservoir using the 1 M6 screw

the front section, seeFRONT END .

Rustproof. See: RUSTPROOFING .
FRONT WHEEL BEARING
NOTE: The illustrations in this service information are used for different model years
and/or models. Some variation may occur. However, the essential information in
the illustrations is always correct.
REMOVAL
REMOVING THE FRONT WHEEL ARCH
Remove components. See: FRONT SECTION, EXPOSING .
Grind off the welds.
Cut off the damaged section.
Grind clean and apply welding primer.
INSTALLATION
INSTALLING THE FRONT WHEEL ARCH
2012 Volvo C30 T-5