ACCESSORIES AND EQUIPMENT Bumpers And Mudflaps - Installation Instructions, Accessories
Applies to cars with reverse warning
Loosen the clips for the cable harness for the reverse warning's sensors from the lower part's catches.
Fig. 218: Bending And Pulling Loose Bumper's Lower Part From Upper Part
Courtesy of VOLVO CARS CORPORATION
Get help from a colleague for this procedure.
Place the bumper casing on a surface that will not damage the painted surface.
Carefully bend and pull loose the bumper's lower part from the upper part. It is fastened with catches all
the way around. The lower part shall not be used again.
NOTE:
Do not damage the painted surface on the upper part.
Fig. 219: Identifying Rear Spoiler
Courtesy of VOLVO CARS CORPORATION
2012 Volvo C30 T-5