INSTALLING COMPONENTS
Install:
the coolant reservoir
the power steering fluid reservoir
the ground strip on the connection at the right-hand suspension turret
the 2 switches for the air conditioning (A/C) system pressure sensor on the air conditioning (A/C) pipes /
hoses
the front bumper cover. See: COVER BUMPER FRONT (2011 LATE - 2012) or COVER BUMPER
FRONT (2010, 2011 EARLY)
CHECKING THE FUNCTION AND LEAK TRACING
Vacuum pump the air conditioning (A/C) system. See: VACUUM PUMPING .
Fill the air conditioning (A/C) system with refrigerant. See: REFRIGERANT, FILLING .
Leak trace the air conditioning (A/C) system. See: LEAK DETECTION, TRACER AGENT , LEAK
TRACING, ELECTRONIC LEAK TRACER (2008-2009) or LEAK TRACING, ELECTRONIC LEAK
TRACER (2007, 2010-11) .
SWITCH HIGH PRESSURE (2007-2011)
REMOVE / INSTALL
NOTE:
Removal steps in this procedure may contain installation details.
Fig. 118: Identifying High Pressure Switch
Courtesy of VOLVO CARS CORPORATION
NOTE:
For tightening torques, see TIGHTENING TORQUE
2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation