Volvo C30 2007 Service And Repair Manual page 404

Fig. 38: Identifying Blower Fan Motor
Courtesy of VOLVO CARS CORPORATION
Place the fan motor in the correct position for installation. Use: see 9997115 .
NOTE: Turn the fan motor to the position for installation.
Insert the fan motor from the driver's side. Turn clockwise to the limit position.
Connect the connector.
Install:
the cover for the air distribution damper using the 3 screws. Tighten

the damper motor module (DMM) recirculation. See: ACTUATOR RECIRCULATION

the connector for the damper motor module (DMM) recirculation

the air quality sensor (AQS).

FINISHING
TESTING THE FAN MOTOR
2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation