Volvo C30 2007 Service And Repair Manual page 49

ACCESSORIES AND BODY, CAB Body Frame - Removal, replacement and installation
Fig. 18: Identifying Seam-Weld Area On Collar
Courtesy of VOLVO CARS CORPORATION
Seam-weld the collar into place using 8 welding seams each measuring 30 mm. See the illustration.
Install:
the wheel arch. See: FRONT WHEEL BEARING

the front side panel. See: BRACKET FRONT PIECE .

Carry out finishing work. See: FINISHING WORK (COMMON TO BOTH METHODS).
SIDE MEMBER, UPPER, REPLACING
REMOVING THE OUTER SECTION OF THE UPPER SIDE MEMBER
2012 Volvo C30 T-5