Volvo C30 2007 Service And Repair Manual page 497

To install, reverse the removal procedure
SWITCH HIGH PRESSURE (2012)
REMOVAL
Fig. 119: Identifying High Pressure Switch
Courtesy of VOLVO CARS CORPORATION
Follow the instruction for tightening torques, see TIGHTENING TORQUE
INSTALLATION
To install, reverse the removal procedure.
Perform climate unit, checking, see CLIMATE CONTROL SYSTEM, CHECK
TEMPERATURE SENSOR EVAPORATOR
NOTE: The illustrations in this service information are used for different model years
and/or models. Some variation may occur. However, the essential information in
the illustrations is always correct.
PREPARATORY WORK
IGNITION OFF
2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation