Volvo C30 2007 Service And Repair Manual page 37

ACCESSORIES AND BODY, CAB Body Frame - Removal, replacement and installation
Fig. 6: Removing Rear Bumper Rail
Courtesy of VOLVO CARS CORPORATION
Torque: M8
24 Nm
For information about corrosion protection, see RUSTPROOFING
INSTALLATION
To install, reverse the removal procedure.
SIDE MEMBER REAR
NOTE: The illustrations in this service information are used for different model years
and/or models. Some variation may occur. However, the essential information in
the illustrations is always correct.
PREPARATORY WORK
EXPOSING AND ASCERTAINING THE DAMAGE
When welding body components, see WELDING, GENERAL .
Remove the components, seeREAR SECTION, EXPOSING (2007-2009) or REAR SECTION, EXPOSING
(2010-2012) .
Pull out the damage.
Determine the extent of the damage. See: REAR SECTION and SIDE MEMBERS REAR .
Expose. See REAR SECTION, EXPOSING (2007-2009) or REAR SECTION, EXPOSING (2010-2012) .
2012 Volvo C30 T-5