Volvo C30 2007 Service And Repair Manual page 73

ACCESSORIES AND BODY, CAB Body Frame - Removal, replacement and installation
Fig. 55: Installing Inner Rear Section
Courtesy of VOLVO CARS CORPORATION
Apply welding primer.
Spot-weld the replacement part. Tip diameter Ø 4, 5 mm.
Also, see WELDING, GENERAL .
Weld the load eyelets into place.
Install:
the rear bumper rail, see REAR BUMPER RAIL

the outer rear section, see TAIL SECTION EXTERNAL.

Seal. See: BODY SEAL, SEALING DIAGRAM .
Rustproof. See: RUSTPROOFING .
Install components. See: REAR SECTION, EXPOSING (2007-2009) or REAR SECTION, EXPOSING
(2010-2012) .
2012 Volvo C30 T-5