Volvo C30 2007 Service And Repair Manual page 623

is always correct.
PREPARATORY WORK
TRANSFERRING COMPONENTS
Fig. 27: Applying Thread Lock To Bolt Threads
Courtesy of VOLVO CARS CORPORATION
Move the ball catch to the new gear box.
Apply the thread lock 1161056 to the threads.
Tighten to 32 Nm.
When replacing the transmission, the transmission cable bracket must be transferred to the new transmission.
INSTALLATION
NOTE: For tightening torques, See TIGHTENING TORQUE .
CLEANING AND LUBRICATING THE INPUT SHAFT
The input shaft must be lubricated before a manual transmission is installed. See INPUT SHAFT,
CLEANING .
CHECKING BEFORE INSTALLING
Check that the transmission and engine mating surfaces are absolutely clean.
Also check that the guide sleeves towards the engine are in position and are free of faults. Lubricate the holes in
the transmission (for the guide pins). Use a little grease.
2012 Volvo C30 T-5
TRANSMISSION Clutch - Removal, replacement and installation