Volvo C30 2007 Service And Repair Manual page 145

ACCESSORIES AND EQUIPMENT Bumpers And Mudflaps - Installation Instructions, Accessories
Fig. 49: View Of Radiator Bracket Drill Hole
Courtesy of VOLVO CARS CORPORATION
Take a 8.5 mm (21/64") drill bit and drill through the hole in the engine's protective plate and through the

bracket for the radiator.
Remove the engine splash guard.

Fig. 50: Identifying Tool P/N 9814112
Courtesy of VOLVO CARS CORPORATION
Cover the underneath of the engine opposite the last hole with cardboard or similar, so that drilling

shavings does not blow up into the engine compartment.
Carefully drill out the last hole. Use tool P/N 9814112 .

File down the edge of the hole.

Remove any shavings.

2012 Volvo C30 T-5