Volvo C30 2007 Service And Repair Manual page 491

the mounting block in the grooves on the pipe

the plastic clip holding the mounting block

the M8 screw securing the air conditioning (A/C) pipes to the evaporator.

Press in the hose into the mounting below the right-hand suspension turret.
PIPE/HOSE BETWEEN CONDENSER AND EXPANSION VALVE, REPLACING
REMOVING COMPONENTS
Fig. 113: Identifying Coolant Reservoir, Power Steering Fluid Reservoir And Hoses
Courtesy of VOLVO CARS CORPORATION
Remove:
the coolant reservoir (1) but leave the hoses in place. Place the reservoir on the valve cover

the power steering fluid reservoir and hoses (2) from its mounting by pulling it upwards at an angle.

Remove:
the ground strip (3) from the connection at the right-hand suspension turret

the 2 switches (4) for the air conditioning (A/C) system pressure sensor from the air conditioning (A/C)

2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation