Volvo C30 2007 Service And Repair Manual page 35

ACCESSORIES AND BODY, CAB Body Frame - Removal, replacement and installation
Fig. 4: Identifying Welding Locations For Replacement Part
Courtesy of VOLVO CARS CORPORATION
Weld the replacement part into place. Lens diameter: Ø 4.5 mm.
Also, see WELDING, GENERAL .
Rustproof. See: RUSTPROOFING .
Install components. See: FRONT SECTION, EXPOSING .
REAR BUMPER RAIL (2007-2009)
Remove the following items:
Shell, lower part of rear bumper. See REAR BUMPER COVER LOWER SECTION (2007-2009)

Shell, upper part of rear bumper. See REAR BUMPER COVER UPPER SECTION

Determine the extent of the damage. See REAR SECTION .
2012 Volvo C30 T-5