Volvo C30 2007 Service And Repair Manual page 472

Fig. 98: Identifying Spacer And Right-Hand Half Of Lead-In
Courtesy of VOLVO CARS CORPORATION
NOTE: Pull the insulation for the pipes as far in towards the evaporator as possible
before installing the spacer and the right-hand half of the lead-in.
Install:
the spacer that holds the heat exchanger and evaporator pipes apart

the right-hand half of the lead-in using the 2 screws.

INSTALLING COMPONENTS
Install:
the M8 screw securing the air conditioning (A/C) pipes in the engine compartment. See: TIGHTENING

TORQUE
the heat exchanger. See HEAT EXCHANGER.

the central electrical unit bracket using the 2 nuts. Install the cable harness

the central electrical unit on the bracket. See: CONTROL MODULE RELAY BOX PASSENGER

COMPARTMENT
the center console. See: INSTALLING CENTER CONSOLE
2012 Volvo C30 T-5
HVAC Climate Units - Removal, Replacement And Installation