Uninstalling The Driver - Roland DWX-50 Setup & Maintenance Manual

8. Close the [Device Manager] and click [OK].
9. Detach the USB cable from the computer, and then restart Windows.
10. Uninstall the driver. Carry out the steps from step 3 in page 58 "Uninstall the Driver Windows XP" to un-
install the driver.
11. Install the driver again according to the procedure in page 38 "Installing the Windows-based driver. "

Uninstalling the Driver

When uninstalling the driver, perform following operation.
Windows 7
*If the driver is uninstalled without following the procedure given below, there is a possibility that it might
not be able to be re-installed.
1. Before you start uninstallation of the driver, unplug the USB cables from your computer.
2. Log on to Windows as "Administrator" right.
3. From the [Start] menu, click [Control Panel]. Click [Uninstall a program].
4. Click the driver for the machine to delete to select it, then Click [Uninstall].
5. A message prompting you to confirm deletion appears. Click [Yes].
6. From the [Start] menu, choose [All Programs], then [Accessories], then [Run], and then click [Browse].
7. Choose the name of the drive or folder where the driver is located. (*)
8. Select "SETUP.EXE" and click [Open], then click [OK].
9. The [User Account Control] appears, click [Allow].
10. The Setup program for the driver starts.
11. Click [Uninstall] to choose it. Select the machine to delete, then click [Start].
12. If it is necessary to restart your computer, a window prompting you to restart it appears. Click [Yes].
13.The uninstallation finishes after the computer restarts.
(*)
When using the CD-ROM, specify the folder as shown below (assuming your CD-ROM drive is the D drive).
D:\Drivers\25D\WIN7X64 (64 bit edition)
D:\Drivers\25D\WIN7X86 (32 bit edition)
If you're not using the CD-ROM, go to the Roland DG Corp. website (http://www.rolanddg.com/) and down-
load the driver for the machine you want to delete, then specify the folder where you want to expand the
downloaded file.
Windows Vista
1. Before you start uninstallation of the driver, unplug the USB cables from your computer.
2. Log on to Windows as "Administrators" right.
3. From the [Start] menu, click [Control Panel]. From the [Hardware and Sound] group, click [Printer]. [Printer]
folder opens.
4. Click the model name's icon you are using. From the [Organize] menu, click [Delete]. The [User Account
Control] appears, click [Continue].
5. A message prompting you to confirm deletion appears. Click [Yes].
6. In the [Printers] folder, right-click any location where no printer icon is present. From the [Run as administra-
tor] menu, select [Server Properties]. The [User Account Control] appears, click [Continue].
7. Click the [Drivers] tab, then from the [Installed printer drivers] list, choose the machine to delete. Click
[Remove].
8. The [Remove Driver And Package] appears, select [Remove driver and driver package]. Click [OK].
What to Do If...
Chapter 3 Appendix 57