Hpe5022_Ber_Selecttestsignal - Agilent Technologies E5022B Programming Manual

hpe5022_BER_selectTestSignal

C Syntax ViStatus hpe5022_BER_selectTestSignal(ViSession id, ViInt16 testNum);
Visual Basic hpe5022_BER_selectTestSignal(ByVal id As Long, ByVal testNum As Integer) As
Syntax Long
Description
This function selects the test signal from the test signal 1/2 connectors on the
E5039A/B front panel. You can monitor the output of the channel IC through these
connectors. The signal is selectable depending on the option of Agilent E5039A/B.
See the manual supplement of Agilent E5039A/B.
Parameters • id
Description
Direction
• testNum
Description
Direction
Values
Return Values
Completion Code
VI_SUCCESS
Error Code
hpe5022_ERROR_INV_ID
hpe5022_ERROR_INV_PARAMETER
Chapter 3
Channel IC Configuration Function
Specifies the system identifier. This is given by the
"hpe5022_init" function.
IN
Specifies the selected test signal number.
IN
Name
hpe5022_BER_TEST_SIGNAL0
hpe5022_BER_TEST_SIGNAL1
hpe5022_BER_TEST_SIGNAL2
hpe5022_BER_TEST_SIGNAL4
Function Reference
Value Description
0 Test Signal 0
1 Test Signal 1
2 Test Signal 2
3 Test Signal 3
Description
No Error
Description
The handle specified by 'id' is
invalid.
The parameter 'testNum' is out of
range.
99